Home | Hot Products | About Us | Contact Us |
FAQ
|
Downloads
 
  PC Cases
 
 
A specialized segment board targeted at SME Network Attached Storage applications
   
Model: EPIA NAS 7800 1.5GHz CPU with Active Fan

Thin servers such as network attached storage are proving increasingly popular with small and medium sized enterprises looking for secure, energy-efficient data storage without investing in large, expensive and power-hungry corporate solutions.

The VIA NAS 7800 is powered by a low heat, energy-efficient 1.5GHz VIA C7® processor with the option of a fanless VIA Eden™ SKU, the VIA NAS 7800 boasts support for up to eight S-ATA II drives, two Gigabit ports. Security is assured with both a TPM module for key generation and storage while data encryption and decryption is performed through hardware using the integrated VIA PadLock Security Engine. An MFX module for comprehensive wake-up scheduling is included, allowing IT managers to further reduce energy costs.

Combining an enviably complete feature set and flawless security, the VIA NAS 7800 also uses a unique 19cm x 14.3cm form factor that matches that of standard optical drives, allowing easy design integration within standard drive sized chassis.

 

 
VIA EPIA NAS7800 Specifications
Processor VIA C7® 1.5GHz NanoBGA2 Processor
Chipset • VIA CN700 North Bridge
• VIA VT8251 South Bridge
System Memory 1 x DDR2 400/533/667** DIMM socket. Up to 1GB memory size. (** DDR2 667MHz memory module can be supported with effective speed to 533MHz)
VGA Integrated VIA UniChrome™ Pro graphics with 2D/3D and MPEG-2 video accelerators
Expansion Slots 1 x 32-Bit Mini PCI slot (for NAS 7800-15LST)
• 1 x Compact Flash type-I slot (Master/Slave selectable)
Onboard LAN 1 x VIA VT6130 PCIe Gigabit Ethernet Controller
• 1 x VIA VT6122 PCI Gigabit Ethernet Controller (for NAS 7800-15LST)
Onboard IDE 1 x UltraDMA 133/100/66 Connector (2.0mm pitch/ 44pins)
Onboard TPM Infineon SLB9635TT 1.2 (Trusted Platform Module)
Back Panel I/O 2 x RJ-45 LAN ports (1 RJ-45 for NAS 7800-15T)
• 4 x USB 2.0 ports
Onboard I/O Connectors • 1 x VGA pin header
• 1 x USB pin header for 2 USB ports (1 USB port supports WLAN control)
• 2 x Se• 1 x VGA pin header
• 1 x USB pin header for 2 USB ports (1 USB port supports WLAN control)
• 2 x Serial port pin connectors (COM1 is powered & selectable with 5V/12V)
• 2 x Fan pin connectors: CPU/Sys FAN
• 1 x PS/2 KB/MS pin connector
• 1 x DIO pin for 16 GPIO (Supported with Hardware Interrupt Function)"
• 1 x MFX connector
• 1 x Front panel pin connector
• 2 x LAN LEDs
• 1 x ATX power connector (manufacturing option for 12V DC-In)
• 4 x SATA (3 Gbps) connectors (for NAS 7800-15T)
• 8 x SATA (3 Gbps) connectors (for NAS 7800-15LST, with one extra SATA controller Marvell 88SE6145 to have 4 more SATA ports)
• 1 x SATA LED (for NAS 7800-15T)
BIOS Award BIOS, LPC 4/8Mbit flash memory
Operating System Windows 2000/XP, Linux, Win CE, XPe
System Monitoring & Management Wake-on LAN, Wake-on Alarm, Watch Dog Timer.
• System power management, AC power failure recovery
Operating Temperature 0~60°C
Operating Humidity 0% ~ 95% (relative humidity; non-condensing)
Form Factor 14.3 cm x 19 cm (L x W); DVD-ROM like size
* These specifications are subject to change without prior notice. * These specifications are subject to change without prior notice. cations
     
  Home   |  About Us  |  Service  |  Warranty  |   Legal Disclaimer  |  Terms and Conditions   |  Privacy  
 
© Copyright 2003. Procase NZ Ltd All Rights Reserved